[gpfsug-discuss] What is an independent fileset? was: mmbackup with fileset : scope errors
Jez Tucker
jtucker at pixitmedia.com
Thu May 18 20:32:54 BST 2017
Hi
When mmbackup has passed the preflight stage (pretty quickly) you'll
find the autogenerated ruleset as /var/mmfs/mmbackup/.mmbackupRules*
Best,
Jez
On 18/05/17 20:02, Jaime Pinto wrote:
> Ok Mark
>
> I'll follow your option 2) suggestion, and capture what mmbackup is
> using as a rule first, then modify it.
>
> I imagine by 'capture' you are referring to the -L n level I use?
>
> -L n
> Controls the level of information displayed by the
> mmbackup command. Larger values indicate the
> display of more detailed information. n should be one of
> the following values:
>
> 3
> Displays the same information as 2, plus each
> candidate file and the applicable rule.
>
> 4
> Displays the same information as 3, plus each
> explicitly EXCLUDEed or LISTed
> file, and the applicable rule.
>
> 5
> Displays the same information as 4, plus the
> attributes of candidate and EXCLUDEed or
> LISTed files.
>
> 6
> Displays the same information as 5, plus
> non-candidate files and their attributes.
>
> Thanks
> Jaime
>
>
>
>
> Quoting "Marc A Kaplan" <makaplan at us.ibm.com>:
>
>> 1. As I surmised, and I now have verification from Mr. mmbackup,
>> mmbackup
>> wants to support incremental backups (using what it calls its shadow
>> database) and keep both your sanity and its sanity -- so mmbackup limits
>> you to either full filesystem or full inode-space (independent fileset.)
>> If you want to do something else, okay, but you have to be careful
>> and be
>> sure of yourself. IBM will not be able to jump in and help you if and
>> when
>> it comes time to restore and you discover that your backup(s) were not
>> complete.
>>
>> 2. If you decide you're a big boy (or woman or XXX) and want to do some
>> hacking ... Fine... But even then, I suggest you do the smallest hack
>> that will mostly achieve your goal...
>> DO NOT think you can create a custom policy rules list for mmbackup
>> out of
>> thin air.... Capture the rules mmbackup creates and make small
>> changes to
>> that --
>> And as with any disaster recovery plan..... Plan your Test and Test
>> your
>> Plan.... Then do some dry run recoveries before you really "need" to
>> do a
>> real recovery.
>>
>> I only even sugest this because Jaime says he has a huge filesystem with
>> several dependent filesets and he really, really wants to do a partial
>> backup, without first copying or re-organizing the filesets.
>>
>> HMMM.... otoh... if you have one or more dependent filesets that are
>> smallish, and/or you don't need the backups -- create independent
>> filesets, copy/move/delete the data, rename, voila.
>>
>>
>>
>> From: "Jaime Pinto" <pinto at scinet.utoronto.ca>
>> To: "Marc A Kaplan" <makaplan at us.ibm.com>
>> Cc: "gpfsug main discussion list" <gpfsug-discuss at spectrumscale.org>
>> Date: 05/18/2017 12:36 PM
>> Subject: Re: [gpfsug-discuss] What is an independent fileset?
>> was:
>> mmbackup with fileset : scope errors
>>
>>
>>
>> Marc
>>
>> The -P option may be a very good workaround, but I still have to test
>> it.
>>
>> I'm currently trying to craft the mm rule, as minimalist as possible,
>> however I'm not sure about what attributes mmbackup expects to see.
>>
>> Below is my first attempt. It would be nice to get comments from
>> somebody familiar with the inner works of mmbackup.
>>
>> Thanks
>> Jaime
>>
>>
>> /* A macro to abbreviate VARCHAR */
>> define([vc],[VARCHAR($1)])
>>
>> /* Define three external lists */
>> RULE EXTERNAL LIST 'allfiles' EXEC
>> '/scratch/r/root/mmpolicyRules/mmpolicyExec-list'
>>
>> /* Generate a list of all files, directories, plus all other file
>> system objects,
>> like symlinks, named pipes, etc. Include the owner's id with each
>> object and
>> sort them by the owner's id */
>>
>> RULE 'r1' LIST 'allfiles'
>> DIRECTORIES_PLUS
>> SHOW('-u' vc(USER_ID) || ' -a' || vc(ACCESS_TIME) || ' -m' ||
>> vc(MODIFICATION_TIME) || ' -s ' || vc(FILE_SIZE))
>> FROM POOL 'system'
>> FOR FILESET('sysadmin3')
>>
>> /* Files in special filesets, such as those excluded, are never
>> traversed
>> */
>> RULE 'ExcSpecialFile' EXCLUDE
>> FOR FILESET('scratch3','project3')
>>
>>
>>
>>
>>
>> Quoting "Marc A Kaplan" <makaplan at us.ibm.com>:
>>
>>> Jaime,
>>>
>>> While we're waiting for the mmbackup expert to weigh in, notice that
>> the
>>> mmbackup command does have a -P option that allows you to provide a
>>> customized policy rules file.
>>>
>>> So... a fairly safe hack is to do a trial mmbackup run, capture the
>>> automatically generated policy file, and then augment it with FOR
>>> FILESET('fileset-I-want-to-backup') clauses.... Then run the mmbackup
>> for
>>> real with your customized policy file.
>>>
>>> mmbackup uses mmapplypolicy which by itself is happy to limit its
>>> directory scan to a particular fileset by using
>>>
>>> mmapplypolicy /path-to-any-directory-within-a-gpfs-filesystem --scope
>>> fileset ....
>>>
>>> However, mmbackup probably has other worries and for simpliciity and
>>> helping make sure you get complete, sensible backups, apparently has
>>> imposed some restrictions to preserve sanity (yours and our support
>> team!
>>> ;-) ) ... (For example, suppose you were doing incremental backups,
>>> starting at different paths each time? -- happy to do so, but when
>>> disaster strikes and you want to restore -- you'll end up confused
>> and/or
>>> unhappy!)
>>>
>>> "converting from one fileset to another" --- sorry there is no such
>> thing.
>>> Filesets are kinda like little filesystems within filesystems. Moving
>> a
>>> file from one fileset to another requires a copy operation. There is
>> no
>>> fast move nor hardlinking.
>>>
>>> --marc
>>>
>>>
>>>
>>> From: "Jaime Pinto" <pinto at scinet.utoronto.ca>
>>> To: "gpfsug main discussion list"
>> <gpfsug-discuss at spectrumscale.org>,
>>> "Marc A Kaplan" <makaplan at us.ibm.com>
>>> Date: 05/18/2017 09:58 AM
>>> Subject: Re: [gpfsug-discuss] What is an independent fileset?
>> was:
>>> mmbackup with fileset : scope errors
>>>
>>>
>>>
>>> Thanks for the explanation Mark and Luis,
>>>
>>> It begs the question: why filesets are created as dependent by
>>> default, if the adverse repercussions can be so great afterward? Even
>>> in my case, where I manage GPFS and TSM deployments (and I have been
>>> around for a while), didn't realize at all that not adding and extra
>>> option at fileset creation time would cause me huge trouble with
>>> scaling later on as I try to use mmbackup.
>>>
>>> When you have different groups to manage file systems and backups that
>>> don't read each-other's manuals ahead of time then we have a really
>>> bad recipe.
>>>
>>> I'm looking forward to your explanation as to why mmbackup cares one
>>> way or another.
>>>
>>> I'm also hoping for a hint as to how to configure backup exclusion
>>> rules on the TSM side to exclude fileset traversing on the GPFS side.
>>> Is mmbackup smart enough (actually smarter than TSM client itself) to
>>> read the exclusion rules on the TSM configuration and apply them
>>> before traversing?
>>>
>>> Thanks
>>> Jaime
>>>
>>> Quoting "Marc A Kaplan" <makaplan at us.ibm.com>:
>>>
>>>> When I see "independent fileset" (in Spectrum/GPFS/Scale) I always
>>> think
>>>> and try to read that as "inode space".
>>>>
>>>> An "independent fileset" has all the attributes of an
>>>> (older-fashioned)
>>>> dependent fileset PLUS all of its files are represented by inodes that
>>> are
>>>> in a separable range of inode numbers - this allows GPFS to
>>>> efficiently
>>> do
>>>> snapshots of just that inode-space (uh... independent fileset)...
>>>>
>>>> And... of course the files of dependent filesets must also be
>>> represented
>>>> by inodes -- those inode numbers are within the inode-space of
>>>> whatever
>>>> the containing independent fileset is... as was chosen when you
>>>> created
>>>> the fileset.... If you didn't say otherwise, inodes come from the
>>>> default "root" fileset....
>>>>
>>>> Clear as your bath-water, no?
>>>>
>>>> So why does mmbackup care one way or another ??? Stay tuned....
>>>>
>>>> BTW - if you look at the bits of the inode numbers carefully --- you
>> may
>>>> not immediately discern what I mean by a "separable range of inode
>>>> numbers" -- (very technical hint) you may need to permute the bit
>>>> order
>>>> before you discern a simple pattern...
>>>>
>>>>
>>>>
>>>> From: "Luis Bolinches" <luis.bolinches at fi.ibm.com>
>>>> To: gpfsug-discuss at spectrumscale.org
>>>> Cc: gpfsug-discuss at spectrumscale.org
>>>> Date: 05/18/2017 02:10 AM
>>>> Subject: Re: [gpfsug-discuss] mmbackup with fileset : scope
>>> errors
>>>> Sent by: gpfsug-discuss-bounces at spectrumscale.org
>>>>
>>>>
>>>>
>>>> Hi
>>>>
>>>> There is no direct way to convert the one fileset that is dependent to
>>>> independent or viceversa.
>>>>
>>>> I would suggest to take a look to chapter 5 of the 2014 redbook, lots
>> of
>>>> definitions about GPFS ILM including filesets
>>>> http://www.redbooks.ibm.com/abstracts/sg248254.html?Open Is not the
>> only
>>>> place that is explained but I honestly believe is a good single start
>>>> point. It also needs an update as does nto have anything on CES nor
>> ESS,
>>>> so anyone in this list feel free to give feedback on that page people
>>> with
>>>> funding decisions listen there.
>>>>
>>>> So you are limited to either migrate the data from that fileset to a
>> new
>>>> independent fileset (multiple ways to do that) or use the TSM client
>>>> config.
>>>>
>>>> ----- Original message -----
>>>> From: "Jaime Pinto" <pinto at scinet.utoronto.ca>
>>>> Sent by: gpfsug-discuss-bounces at spectrumscale.org
>>>> To: "gpfsug main discussion list" <gpfsug-discuss at spectrumscale.org>,
>>>> "Jaime Pinto" <pinto at scinet.utoronto.ca>
>>>> Cc:
>>>> Subject: Re: [gpfsug-discuss] mmbackup with fileset : scope errors
>>>> Date: Thu, May 18, 2017 4:43 AM
>>>>
>>>> There is hope. See reference link below:
>>>>
>>>
>> https://www.ibm.com/support/knowledgecenter/en/STXKQY_4.1.1/com.ibm.spectrum.scale.v4r11.ins.doc/bl1ins_tsm_fsvsfset.htm
>>
>>
>>>
>>>>
>>>>
>>>> The issue has to do with dependent vs. independent filesets, something
>>>> I didn't even realize existed until now. Our filesets are dependent
>>>> (for no particular reason), so I have to find a way to turn them into
>>>> independent.
>>>>
>>>> The proper option syntax is "--scope inodespace", and the error
>>>> message actually flagged that out, however I didn't know how to
>>>> interpret what I saw:
>>>>
>>>>
>>>> # mmbackup /gpfs/sgfs1/sysadmin3 -N tsm-helper1-ib0 -s /dev/shm
>>>> --scope inodespace --tsm-errorlog $logfile -L 2
>>>> --------------------------------------------------------
>>>> mmbackup: Backup of /gpfs/sgfs1/sysadmin3 begins at Wed May 17
>>>> 21:27:43 EDT 2017.
>>>> --------------------------------------------------------
>>>> Wed May 17 21:27:45 2017 mmbackup:mmbackup: Backing up *dependent*
>>>> fileset sysadmin3 is not supported
>>>> Wed May 17 21:27:45 2017 mmbackup:This fileset is not suitable for
>>>> fileset level backup. exit 1
>>>> --------------------------------------------------------
>>>>
>>>> Will post the outcome.
>>>> Jaime
>>>>
>>>>
>>>>
>>>> Quoting "Jaime Pinto" <pinto at scinet.utoronto.ca>:
>>>>
>>>>> Quoting "Luis Bolinches" <luis.bolinches at fi.ibm.com>:
>>>>>
>>>>>> Hi
>>>>>>
>>>>>> have you tried to add exceptions on the TSM client config file?
>>>>>
>>>>> Hey Luis,
>>>>>
>>>>> That would work as well (mechanically), however it's not elegant or
>>>>> efficient. When you have over 1PB and 200M files on scratch it will
>>>>> take many hours and several helper nodes to traverse that fileset
>>>>> just
>>>>> to be negated by TSM. In fact exclusion on TSM are just as
>> inefficient.
>>>>> Considering that I want to keep project and sysadmin on different
>>>>> domains then it's much worst, since we have to traverse and exclude
>>>>> scratch & (project|sysadmin) twice, once to capture sysadmin and
>>>>> again
>>>>> to capture project.
>>>>>
>>>>> If I have to use exclusion rules it has to rely sole on gpfs rules,
>> and
>>>>> somehow not traverse scratch at all.
>>>>>
>>>>> I suspect there is a way to do this properly, however the examples on
>>>>> the gpfs guide and other references are not exhaustive. They only
>>>>> show
>>>>> a couple of trivial cases.
>>>>>
>>>>> However my situation is not unique. I suspect there are may
>>>>> facilities
>>>>> having to deal with backup of HUGE filesets.
>>>>>
>>>>> So the search is on.
>>>>>
>>>>> Thanks
>>>>> Jaime
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>> Assuming your GPFS dir is /IBM/GPFS and your fileset to exclude is
>>>> linked
>>>>>> on /IBM/GPFS/FSET1
>>>>>>
>>>>>> dsm.sys
>>>>>> ...
>>>>>>
>>>>>> DOMAIN /IBM/GPFS
>>>>>> EXCLUDE.DIR /IBM/GPFS/FSET1
>>>>>>
>>>>>>
>>>>>> From: "Jaime Pinto" <pinto at scinet.utoronto.ca>
>>>>>> To: "gpfsug main discussion list"
>>>> <gpfsug-discuss at spectrumscale.org>
>>>>>> Date: 17-05-17 23:44
>>>>>> Subject: [gpfsug-discuss] mmbackup with fileset : scope
>>>>>> errors
>>>>>> Sent by: gpfsug-discuss-bounces at spectrumscale.org
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have a g200 /gpfs/sgfs1 filesystem with 3 filesets:
>>>>>> * project3
>>>>>> * scratch3
>>>>>> * sysadmin3
>>>>>>
>>>>>> I have no problems mmbacking up /gpfs/sgfs1 (or sgfs1), however we
>>>>>> have no need or space to include *scratch3* on TSM.
>>>>>>
>>>>>> Question: how to craft the mmbackup command to backup
>>>>>> /gpfs/sgfs1/project3 and/or /gpfs/sgfs1/sysadmin3 only?
>>>>>>
>>>>>> Below are 3 types of errors:
>>>>>>
>>>>>> 1) mmbackup /gpfs/sgfs1/sysadmin3 -N tsm-helper1-ib0 -s /dev/shm
>>>>>> --tsm-errorlog $logfile -L 2
>>>>>>
>>>>>> ERROR: mmbackup: Options /gpfs/sgfs1/sysadmin3 and --scope
>>>>>> filesystem
>>>>>> cannot be specified at the same time.
>>>>>>
>>>>>> 2) mmbackup /gpfs/sgfs1/sysadmin3 -N tsm-helper1-ib0 -s /dev/shm
>>>>>> --scope inodespace --tsm-errorlog $logfile -L 2
>>>>>>
>>>>>> ERROR: Wed May 17 16:27:11 2017 mmbackup:mmbackup: Backing up
>>>>>> dependent fileset sysadmin3 is not supported
>>>>>> Wed May 17 16:27:11 2017 mmbackup:This fileset is not suitable for
>>>>>> fileset level backup. exit 1
>>>>>>
>>>>>> 3) mmbackup /gpfs/sgfs1/sysadmin3 -N tsm-helper1-ib0 -s /dev/shm
>>>>>> --scope filesystem --tsm-errorlog $logfile -L 2
>>>>>>
>>>>>> ERROR: mmbackup: Options /gpfs/sgfs1/sysadmin3 and --scope
>>>>>> filesystem
>>>>>> cannot be specified at the same time.
>>>>>>
>>>>>> These examples don't really cover my case:
>>>>>>
>>>>
>>>
>> https://www.ibm.com/support/knowledgecenter/en/STXKQY_4.2.3/com.ibm.spectrum.scale.v4r23.doc/bl1adm_mmbackup.htm#mmbackup__mmbackup_examples
>>
>>
>>>
>>>>
>>>>>>
>>>>>>
>>>>>> Thanks
>>>>>> Jaime
>>>>>>
>>>>>>
>>>>>> ************************************
>>>>>> TELL US ABOUT YOUR SUCCESS STORIES
>>>>>> http://www.scinethpc.ca/testimonials
>>>>>> ************************************
>>>>>> ---
>>>>>> Jaime Pinto
>>>>>> SciNet HPC Consortium - Compute/Calcul Canada
>>>>>> www.scinet.utoronto.ca - www.computecanada.ca
>>>>>> University of Toronto
>>>>>> 661 University Ave. (MaRS), Suite 1140
>>>>>> Toronto, ON, M5G1M1
>>>>>> P: 416-978-2755
>>>>>> C: 416-505-1477
>>>>>>
>>>>>> ----------------------------------------------------------------
>>>>>> This message was sent using IMP at SciNet Consortium, University of
>>>>>> Toronto.
>>>>>>
>>>>>> _______________________________________________
>>>>>> gpfsug-discuss mailing list
>>>>>> gpfsug-discuss at spectrumscale.org
>>>>>> http://gpfsug.org/mailman/listinfo/gpfsug-discuss
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Ellei edellä ole toisin mainittu: / Unless stated otherwise above:
>>>>>> Oy IBM Finland Ab
>>>>>> PL 265, 00101 Helsinki, Finland
>>>>>> Business ID, Y-tunnus: 0195876-3
>>>>>> Registered in Finland
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ************************************
>>>>> TELL US ABOUT YOUR SUCCESS STORIES
>>>>> http://www.scinethpc.ca/testimonials
>>>>> ************************************
>>>>> ---
>>>>> Jaime Pinto
>>>>> SciNet HPC Consortium - Compute/Calcul Canada
>>>>> www.scinet.utoronto.ca - www.computecanada.ca
>>>>> University of Toronto
>>>>> 661 University Ave. (MaRS), Suite 1140
>>>>> Toronto, ON, M5G1M1
>>>>> P: 416-978-2755
>>>>> C: 416-505-1477
>>>>>
>>>>> ----------------------------------------------------------------
>>>>> This message was sent using IMP at SciNet Consortium, University of
>>>> Toronto.
>>>>>
>>>>> _______________________________________________
>>>>> gpfsug-discuss mailing list
>>>>> gpfsug-discuss at spectrumscale.org
>>>>> http://gpfsug.org/mailman/listinfo/gpfsug-discuss
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ************************************
>>>> TELL US ABOUT YOUR SUCCESS STORIES
>>>> http://www.scinethpc.ca/testimonials
>>>> ************************************
>>>> ---
>>>> Jaime Pinto
>>>> SciNet HPC Consortium - Compute/Calcul Canada
>>>> www.scinet.utoronto.ca - www.computecanada.ca
>>>> University of Toronto
>>>> 661 University Ave. (MaRS), Suite 1140
>>>> Toronto, ON, M5G1M1
>>>> P: 416-978-2755
>>>> C: 416-505-1477
>>>>
>>>> ----------------------------------------------------------------
>>>> This message was sent using IMP at SciNet Consortium, University of
>>>> Toronto.
>>>>
>>>> _______________________________________________
>>>> gpfsug-discuss mailing list
>>>> gpfsug-discuss at spectrumscale.org
>>>> http://gpfsug.org/mailman/listinfo/gpfsug-discuss
>>>>
>>>>
>>>>
>>>> Ellei edellä ole toisin mainittu: / Unless stated otherwise above:
>>>> Oy IBM Finland Ab
>>>> PL 265, 00101 Helsinki, Finland
>>>> Business ID, Y-tunnus: 0195876-3
>>>> Registered in Finland
>>>> _______________________________________________
>>>> gpfsug-discuss mailing list
>>>> gpfsug-discuss at spectrumscale.org
>>>> http://gpfsug.org/mailman/listinfo/gpfsug-discuss
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ************************************
>>> TELL US ABOUT YOUR SUCCESS STORIES
>>> http://www.scinethpc.ca/testimonials
>>> ************************************
>>> ---
>>> Jaime Pinto
>>> SciNet HPC Consortium - Compute/Calcul Canada
>>> www.scinet.utoronto.ca - www.computecanada.ca
>>> University of Toronto
>>> 661 University Ave. (MaRS), Suite 1140
>>> Toronto, ON, M5G1M1
>>> P: 416-978-2755
>>> C: 416-505-1477
>>>
>>> ----------------------------------------------------------------
>>> This message was sent using IMP at SciNet Consortium, University of
>>> Toronto.
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>> ************************************
>> TELL US ABOUT YOUR SUCCESS STORIES
>> http://www.scinethpc.ca/testimonials
>> ************************************
>> ---
>> Jaime Pinto
>> SciNet HPC Consortium - Compute/Calcul Canada
>> www.scinet.utoronto.ca - www.computecanada.ca
>> University of Toronto
>> 661 University Ave. (MaRS), Suite 1140
>> Toronto, ON, M5G1M1
>> P: 416-978-2755
>> C: 416-505-1477
>>
>> ----------------------------------------------------------------
>> This message was sent using IMP at SciNet Consortium, University of
>> Toronto.
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
> ************************************
> TELL US ABOUT YOUR SUCCESS STORIES
> http://www.scinethpc.ca/testimonials
> ************************************
> ---
> Jaime Pinto
> SciNet HPC Consortium - Compute/Calcul Canada
> www.scinet.utoronto.ca - www.computecanada.ca
> University of Toronto
> 661 University Ave. (MaRS), Suite 1140
> Toronto, ON, M5G1M1
> P: 416-978-2755
> C: 416-505-1477
>
> ----------------------------------------------------------------
> This message was sent using IMP at SciNet Consortium, University of
> Toronto.
>
> _______________________________________________
> gpfsug-discuss mailing list
> gpfsug-discuss at spectrumscale.org
> http://gpfsug.org/mailman/listinfo/gpfsug-discuss
--
*Jez Tucker*
Head of Research and Development, Pixit Media
07764193820 | jtucker at pixitmedia.com <mailto:jtucker at pixitmedia.com>
www.pixitmedia.com <http://www.pixitmedia.com> | Tw:@pixitmedia.com
<https://twitter.com/PixitMedia>
--
<http://pixitmedia.com/pixcache/>
This email is confidential in that it is intended for the exclusive
attention of the addressee(s) indicated. If you are not the intended
recipient, this email should not be read or disclosed to any other person.
Please notify the sender immediately and delete this email from your
computer system. Any opinions expressed are not necessarily those of the
company from which this email was sent and, whilst to the best of our
knowledge no viruses or defects exist, no responsibility can be accepted
for any loss or damage arising from its receipt or subsequent use of this
email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gpfsug.org/pipermail/gpfsug-discuss_gpfsug.org/attachments/20170518/63d4278e/attachment-0002.htm>
More information about the gpfsug-discuss
mailing list